<< Back to HatchAI Ecos
Hatchery v1.0
₨ 65,000
The Hatchery v1.0 is a desktop-sized 3d Printer, geared for a layman consumer. The Hatchery is the result of 100s of hours of research and development to simplify this complex piece of machinery so even an eight year old (ofcourse under adult supervision) kid can start 3d printing.
The Hatchery has been designed from the ground up for sparking creativity in users of all ages. We built the Hatchery from a mix of new, upcycled / recycled e-waste and self hatched components, making Hatchery an emblem of creativity
Product details below
5 in stock
Small enough to fit on your work-desk
Desktop Size (270 x 330 x 410mm HxWxD)
Quality Hatch (prints), everytime
Enclosed chamber for optimum Hatch (print) conditions
Hassle-Free iString (filament) Load / Un-load
Ergonomic design and ingenious software makes for a convenient iString (filament) loading/ unloading experience
Never end with a Hatch (print) failure
A built-in iString (filament) run-out sensor ensures to pause your Hatch while you load a new iString (filament) and resume
Better bed adhesion, a better Hatch (print)
Automatic bed-leveling and a heated bed (upto 120C) ensures optimum first layer bonding, so your Hatch doesn’t dislodge before completion
Less expensive to run
With a maximum power consumption of 240W, long Hatches (prints) won’t burn a hole in your pocket
A safe experience
Built-in short circuit protection, DC fuse, and an enclosed sheet-metal chamber delivers a safe experience from the harsh internal temperatures (upwards of 200C)
Stand-alone functionality
Hatch (print) without any computer attached to the Hatchery (3D Printer), using the built-in SD card reader
Hundreds of Hatch-ready Ideas
With thousands of awesome models available (HatchAI Ecos) at your fingertips, and new added every week, you’ll always have something to get you started with
Hatchery v1.0: Info you might be looking for!
How’s Hatchery is different than other 3D printers?
Hatchery has been designed from the ground up for sparking creativity in users of all age. We built the Hatchery from a mix of new, upcycled / recycled e-waste and self hatched components, making Hatchery an emblem of creativity.
We enable you to 3D print models by providing an intuitive interface and a rich selection of high quality content.
Can I upload my own models?
Yes. The Hatchery is a fully-functioning 3D printer and supports industry standard gCode format. This is however recommended for advanced users only.
Am I locked into the HatchAI Ecos?
No. You can import models from other platforms, and you can also use other 1.75mm PETG filament. However, our iString (filament) are better tested with the Hatchery, and we cannot guarantee that you will get the same Hatchery experience from other manufacturers’ filaments.
What printing materials does it use?
Our iStrings are made of PETG. We only recommend PETG because of superior printing experience. The Hatchery is however compatible with commonly used 3d printing materials such as PLA, ABS, TPU, TPE, PVA, etc
Can I plug in my Hatchery into any electrical outlet?
Yes, Hatchery can be plugged into any outlet that is within 220V-240V.
How many things can I Hatch with one iString spool?
This really depends on what you are Hatching. Smaller models can be Hatched up to hundreds while bigger models upto twenty.
How long does it take to Hatch?
Hatching time is completely dependent on the model being Hatched. Most Hatches in HatchAI Ecos will take under 1 hours while some bigger Hatches can take upto 4 hours.
Where can I find the User Manual for the Hatchery v1.0?
Here at TeenyFactory we are obsessed with being environmentally friendly. We, therefore do not include a printed version of the User Manual when you purchase the Hatchery v1.0. A digital version can be downloaded from here
- Pre-assembled and calibrated Hatchery v1.0
- 1KG iString (PETG Filament 1.75mm)
- Power Cord
- 4GB MicroSD card and adapter
- USB adapter for MicroSD card
- iString spool bracket (assembly required)
- iString trimmer
- iString dust filter
Physical Dimensions: 270 x 330 x 410mm HxWxD
Shipping Weight: 12Kg
Net Weight: 10Kg
Assembly: Pre-assembled and Calibrated
Layer Resolution: 150 microns (recommended 300 microns)
Speed: 150 mm/s
Print Volume max: 90 x 90 x 90mm
Nozzle Diameter: 0.6mm
Extruder: Single bowden type, Max temperature 250C
Print Bed: Heated Bed, Max temperature 120C
Display: Backlit LCD Screen (20 x 4 alphanumeric)
Print Material: PETG
Voltage: 220 – 240V (max 240W)
- Delivery can take up to 15 days after receipt of payment
- After Sales Service:
- The product carries 30 days free after sales services unless otherwise stated
- Company provides only checking warranty of parts and does not provide any other warranty unless otherwise stated
- The product carries only 30 days free after-sales service and no return or exchange will be entertained. After 30 days a nominal service fee will be charged and any parts replacement will be charged at actual
